4 1/4" x 4 1/4" Rosewood Finish Gift Medal / Presentation Box
Personalize with Laser Engraving or UV-LED Print
Rosewood Piano Finish Gift Boxes are multi-purposed boxes used to present awards, medals, jewelry, challenge coins, etc.
Quantity discounts automatically apply!
ADDITIONAL DETAILS- Overall box dimensions 4 1/4" L x 4 1/4" W x 1 1/4" H
- Outside lid 5/8" H - Inside lid depth 7/16" - Lid inside has foam glued in place
- Inside measurement is approximately 3 1/2" x 3 1/2
- Outside bottom is 5/8" H - Inside bottom depth is 7/16"
- Bottom has two pieces of foam (each 3/16" thick). Foam can be removed, but box under foam is not finished
- Box side walls are 5/16" thick
- Box lid has rounded edges
- Magnet in top and bottom of front holds the lid closed
- Black felt on outside bottom of box
- Made of MDF with a Rosewood Finish foil
- Individually packaged in a white corrugated box
LASER INSTRUCTIONS- Rosewood Finish Raster settings
- 35 watt DPI 400 Speed 25% Power 80%
- 60 watt DPI 400 Speed 45% Power 80%
Note: The recommended settings above may need adjustments for best results. Settings will vary depending on the Brand watt and model - Lasering wood gift items
1. Place in laser so gift item is flat and level
2. Gift items are front engraving only
3. Piano and rosewood items are typically masked & paint filled - Clean up:
1. After lasering gift item clean with cirtus cleaner - if paint filled remove mask - FOAM VECTOR SETTINGS
Starting points
35W 15S 25P 2500hz
60W 15s 20P 2000hz
80W (TROTEC) 30P Speed 2.5 1000hz
120W 20s 15P 1500hz - Best to use your vector grid when cutting to help with heat flow. Thicker 1 pieces may take 2 passes or a little more power to cut through. There will be a smell but this material is laser safe.
