7 3/4" x 6 1/4" x 2 3/8" Small Rosewood Finish Gift Box
Personalize with Laser Engraving or UV-LED Print
Rosewood Gift Boxes with removable foam insert in box can be laser cut to fit any item
Quantity discounts automatically apply!
ADDITIONAL DETAILS- Overall box dimensions 7 3/4" L x 6 1/4" W x 2 3/8" H x 3/8" Thick
- Interior dimensions for bottom of box 6 5/8" L x 5 1/8" W x 1 3/8" D
- Interior dimensions of the lid 6 5/8" L x 5 1/8" W x 11/16" D
- Inside of box is velvet lined on bottom only, inside edges of lid have foam
- Outside lid is 13/16" H. Inside lid has a depth of 11/16". Lid inside has foam attached
- Box has removable foam 9/16" thick
- Box lid has rounded edges
- Four rubber bumpers on bottom of box
- Foam can be laser cut to fit most any item
- Has gold hinges and a gold flip-down clasp
LASER INSTRUCTIONS- Rosewood Finish Raster settings
- 35 watt DPI 400 Speed 25% Power 80%
- 60 watt DPI 400 Speed 45% Power 80%
Note: The recommended settings above may need adjustments for best results. Settings will vary depending on the Brand watt and model - Lasering wood gift items
1. Place in laser so gift item is flat and level
2. Gift items are front engraving only
3. Piano and rosewood items are typically masked & paint filled - Clean up:
1. After lasering gift item clean with cirtus cleaner - if paint filled remove mask - FOAM VECTOR SETTINGS
Starting points
35W 15S 25P 2500hz
60W 15s 20P 2000hz
80W (TROTEC) 30P Speed 2.5 1000hz
120W 20s 15P 1500hz - Best to use your vector grid when cutting to help with heat flow. Thicker 1 pieces may take 2 passes or a little more power to cut through. There will be a smell but this material is laser safe.
