10 1/4" x 7 1/2" x 3 1/8" Medium Rosewood Piano Finish Gift Box
Personalize with Laser Engraving or UV-LED Print
Rosewood Piano Gift Boxes has rounded edges to add a unique touch.
Ideal for holding customized gift items
Quantity discounts automatically apply!
ADDITIONAL DETAILS- Overall box dimensions 10 1/4" L x 7 1/2" W x 3 1/8" H x 5/8" thick
- Interior dimensions for bottom of box 9 1/8" L x 6 1/4" W x 2" D
- Interior dimensions of the lid 9 1/8" L x 6 1/4" W x 3/4" D
- Inside of box is velvet lined, around inside edges of box and under foam
- Outside lid is 1" H. Inside lid has a depth of 3/4". Lid inside has foam attached
- Box has removable foam: 9/16" thick (2 layers on bottom, 1 layer on top)
- Box lid has rounded edges
- Box is made from Rubber Wood
- Has gold hinges and a gold flip-down clasp
- Outside box 2 1/16" H. Inside box 2" deep
- Box side walls are 5/8" Thick
LASER INSTRUCTIONS- Piano Finish Raster settings:
- 35 watt DPI 400 Speed 25% Power 55%
- 60 watt DPI 400 Speed 35% Power 45%
Note: The recommended settings above may need adjustments for best results. Settings will vary depending on the Brand watt and model - Lasering wood gift items
1. Place in laser so gift item is flat and level
2. Gift items are front engraving only
3. Piano and rosewood items are typically masked & paint filled - Clean up:
1. After lasering gift item clean with cirtus cleaner - if paint filled remove mask - FOAM VECTOR SETTINGS
Starting points
35W 15S 25P 2500hz
60W 15s 20P 2000hz
80W (TROTEC) 30P Speed 2.5 1000hz
120W 20s 15P 1500hz - Best to use your vector grid when cutting to help with heat flow. Thicker 1 pieces may take 2 passes or a little more power to cut through. There will be a smell but this material is laser safe.
